下颌骨重建定位技术在下颌骨重建中的研究进展

中国口腔医学继续教育杂志 ›› 2022, Vol. 25 ›› Issue (6): 341-345.

下颌骨重建定位技术在下颌骨重建中的研究进展

吴昊^1,2, 王梓霖¹, 郭陟永¹, 刘一戈¹, 韩婧¹, 刘剑楠¹, 张陈平^1,*

¹上海交通大学医学院附属第九人民医院口腔颌面头颈肿瘤科,上海交通大学口腔医学院,国家口腔医学中心,国家口腔疾病临床医学研究中心,上海市口腔医学重点实验室,上海市口腔医学研究所;
²上海理工大学健康科学与工程学院

出版日期:2022-11-30 发布日期:2022-11-28
通讯作者: ^*张陈平,联系方式 021-23271699,电子邮箱 zhang.chenping@hotmail.com,通讯地址上海市黄浦区制造局路639号,200011
基金资助:
上海申康医院发展中心临床创新三年行动计划资助（项目编号：SHDC2020CR3008A）

Online:2022-11-30 Published:2022-11-28

摘要/Abstract

摘要： 颌面部的肿瘤、外伤常常会造成颌面部骨组织或软组织的缺损。下颌骨是颌面部唯一具有双侧联动关节的骨,内外侧附着大量咀嚼肌维持双侧的平衡及行使生理功能,一旦发生节段性缺损可导致残端骨块严重移位,影响患者的咀嚼、吞咽、语音以及保持上呼吸道通畅等功能。因此,在下颌骨缺损修复重建过程中,如何在恢复连续性的前提下,精确定位其空间位置关系具有重要意义。本文将对下颌骨重建中定位技术的发展进行综述。

关键词: 下颌骨重建定位技术, 手术导板, 数字化技术, 人工智能

吴昊, 王梓霖, 郭陟永, 刘一戈, 韩婧, 刘剑楠, 张陈平. 下颌骨重建定位技术在下颌骨重建中的研究进展[J]. 中国口腔医学继续教育杂志, 2022, 25(6): 341-345.

[1] Hidalgo DA.Fibula free flap:a new method of mandible reconstruction[J]. Plast Reconstr Surg. 1989; 84(1):71-79.
[2] Berrone M, Crosetti E, Battiston B, et al.Virtual Surgical Planning for Mandible Reconstruction With a Double Barrel Fibula Flap and Immediate Implant Placement[J]. J Craniofac Surg. 2020; 31(1):e41-e43.
[3] Druelle C, Schlund M, Lutz JC, et al.A modified method for a customized harvest of fibula free flap in maxillofacial reconstruction. [J] Stomatol Oral Maxillofac Surg. 2020; 121(1):74-76.
[4] Seier T, Hingsammer L, Schumann P, et al.Virtual planning, simultaneous dental implantation and CAD/CAM plate fixation:a paradigm change in maxillofacial reconstruction[J]. Int J Oral Maxillofac Surg. 2020; 49(7):854-861.
[5] Lee JB, Han JW, Park JH, et al.Lower facial contouring surgery using a novel method:M-genioplasty[J]. Arch Plast Surg. 2018; 45(6):572-577.
[6] Yadav PS, Ahmad QG, Shankhdhar VK, et al.Reconstruction of oncological oro-mandibular defects with double skin paddled-free fibula flap:a prudent alternative to double flaps in resource-constrained centres[J]. J Cancer Res Ther. 2012; 8(1):91-95.
[7] Lu T, Shao Z, Liu B, et al.Recent advance in patient-specific 3D printing templates in mandibular reconstruction[J]. J Mech Behav Biomed Mater. 2020; 106:103725.
[8] Gullane PJ, Havas TE, Holmes HH.Mandibular reconstruction with metal plate and myocutaneous flap[J]. Aust N Z J Surg. 1986; 56(9):701-706.
[9] Yildirim S, Aköz T.Use of Kirschner wire in mandible reconstruction:a case report and review of the literature[J]. Microsurgery. 2004; 24(1):3-7.
[10] Marchetti C, Bianchi A, Mazzoni S, et al.Oromandibular reconstruction using a fibula osteocutaneous free flap:four different “preplating” techniques[J]. Plast Reconstr Surg. 2006; 118(3):643-651.
[11] Martola M, Lindqvist C, Hanninen H, et al.Fracture of titanium plates used for mandibular reconstruction following ablative tumor surgery[J]. J Biomed Mater Res B Appl Biomater. 2007; 80(2):345-352.
[12] Katakura A, Shibahara T, Noma H, et al.Material analysis of AO plate fracture cases[J]. J Oral Maxillofac Surg. 2004; 62(3):348-352.
[13] Schubert C, van Langeveld MC, Donoso LA. Innovations in 3D printing:a 3D overview from optics to organs[J]. Br J Ophthalmol. 2014; 98(2):159-161.
[14] Mohindra A, Blanco-Guzman MM.Temporary mandibular stabilisation during reconstruction:an alternative technique[J]. Br J Oral Maxillofac Surg. 2009; 47(5):399-400.
[15] Funayama A, Kojima T, Yoshizawa M, et al.A simple technique for repositioning of the mandible by a surgical guide prepared using a three-dimensional model after segmental mandibulectomy[J]. Maxillofac Plast Reconstr Surg. 2017; 39(1):16.
[16] Weijs WL, Coppen C, Schreurs R, et al.Accuracy of virtually 3D planned resection templates in mandibular reconstruction[J]. J Craniomaxillofac Surg. 2016; 44(11):1828-1832.
[17] Azuma M, Yanagawa T, Ishibashi-Kanno N, et al.Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity[J]. Head Face Med. 2014; 10:45.
[18] Toro C, Robiony M, Costa F, et al.Feasibility of preoperative planning using anatomical facsimile models for mandibular reconstruction[J]. Head Face Med. 2007; 3:5.
[19] Xingzhou Q, Wang Z, Ong HS, et al.Accuracy of Computer-Aided Design/Computer-Aided Manufacturing Surgical Template for Guidance of Dental Implant Distraction in Mandibular Reconstruction With Free Fibula Flaps[J]. J Craniofac Surg. 2020; 31(2):355-359.
[20] Yamochi R, Numajiri T, Nakamura H, et al.Innovative CAD/CAM Guide for Mandibular Reconstruction with Metallic Condylar Head and Free Fibular Flap[J]. Plast Reconstr Surg Glob Open. 2020; 8(9):e3088.
[21] Lee UL, Kwon JS, Woo SH, et al. Simultaneous Bimaxillary Surgery and Mandibular Reconstruction With a 3-Dimensional Printed Titanium Implant Fabricated by Electron Beam Melting:A Preliminary Mechanical Testing of the Printed Mandible[J]. J Oral Maxillofac Surg.2016; 74(7):1501.e1-1501.e15.
[22] Ren Y, Xi Q, Zhang L, et al.Computer-Aided Design and Three-Dimensional-Printed Surgical Templates for Second-Stage Mandibular Reconstruction[J]. J Craniofac Surg. 2018; 29(8):2101-2105.
[23] Lee YW, You HJ, Jung JA, et al.Mandibular reconstruction using customized three-dimensional titanium implant[J]. Arch Craniofac Surg. 2018; 19(2):152-156.
[24] Ghai S, Sharma Y, Jain N, et al.Use of 3-D printing technologies in craniomaxillofacial surgery:a review[J]. Oral Maxillofac Surg. 2018; 22(3):249-259.
[25] Yang WF, Choi W S, Leung YY, et al.Three-dimensional printing of patient-specific surgical plates in head and neck reconstruction:A prospective pilot study[J]. Oral Oncol. 2018; 78:31-36.
[26] Balasundaram I, AL-Hadad I, Parmar S.Recent advances in reconstructive oral and maxillofacial surgery[J]. Br J Oral Maxillofac Surg. 2012; 50(8):695-705.
[27] Shen SY, Yu Y, Zhang WB, et al.Angle-to-Angle Mandibular Defect Reconstruction With Fibula Flap by Using a Mandibular Fixation Device and Surgical Navigation[J]. J Craniofac Surg. 2017; 28(6):1486-1491.
[28] Yin XL, Tan YR, Liu Y, et al.Clinical Application of Temporary External Fixator for Immediate Mandibular Reconstruction[J]. J Craniofac Surg. 2019; 30(4):e337-e342.
[29] Sukegawa S, Kanno T, Furuki Y.Application of computer-assisted navigation systems in oral and maxillofacial surgery[J]. Jpn Dent Sci Rev. 2018; 54(3):139-149.
[30] Bao T, He J, Yu C, et al.Utilization of a pre-bent plate-positioning surgical guide system in precise mandibular reconstruction with a free fibula flap[J]. Oral Oncol. 2017; 75:133-139.
[31] Mathew N, Gandhi S, Singh I, et al.3D Models Revolutionizing Surgical Outcomes in Oral and Maxillofacial Surgery:Experience at Our Center[J]. J Maxillofac Oral Surg. 2020; 19(2):208-216.
[32] Yu Y, Zhang WB, Liu XJ, et al.Three-Dimensional Accuracy of Virtual Planning and Surgical Navigation for Mandibular Reconstruction With Free Fibula Flap[J]. J Oral Maxillofac Surg. 2016; 74(7):1503 e1-e1510.
[33] Azarmehr I, Stokbro K, Bell RB, et al.Surgical Navigation:A Systematic Review of Indications, Treatments, and Outcomes in Oral and Maxillofacial Surgery[J]. J Oral Maxillofac Surg. 2017; 75(9):1987-2005.

下颌骨重建定位技术在下颌骨重建中的研究进展

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	冯志宏, 赵铱民. 颌面赝复治疗的进展[J]. 中国口腔医学继续教育杂志, 2022, 25(6): 329-334.
[2]	衣颖杰, 孙方方, 孟佳丽, 吴国锋. 聚醚酮酮上颌骨缺损阻塞器修复病例1例[J]. 中国口腔医学继续教育杂志, 2022, 25(6): 383-387.