Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation

doi:10.12337/zgkqjxjyzz.2026.02.003

Chinese Journal of Stomatological Continuing Education ›› 2026, Vol. 29 ›› Issue (2): 96-102.DOI: 10.12337/zgkqjxjyzz.2026.02.003

Previous Articles Next Articles

Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation

Jian Yang^1,2, Hongqiang Ye¹, Peihui Zou², Xiaoying Chen², Yongsheng Zhou^1,*

¹Department of Prosthodontics, Peking University School and Hospital of Stomatology & National Center for Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Research Center for Oral Biomaterials and Digital Medical Devices & Beijing Key Laboratory of Craniofacial Tissue Biofabrication and Regeneration & NHC Key Laboratory of Digital Stomatology, Beijing 100081, P.R. China;
²Tianzhu Clinic Division, Peking University School and Hospital of Stomatology, Beijing 101318, P.R. China

Online:2026-03-31 Published:2026-06-23
Contact: Yongsheng Zhou. Tel: 010-82195393. Email: kqzhouysh@hsc.pku.edu.cn. Address: No.22, Zhongguancun South Avenue, Haidian District, Beijing 100081, P.R. China.

Abstract

Abstract: The group standard of ‘Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation’ issued by the Chinese Stomatological Association proposes a series of recommendations for the technical system of computer aided design/ computer aided manufacturing (CAD/CAM). This article interprets the guidelines in detail from the aspects of indications selection, material selection, tooth preparation principles, requirements for digital impressions, morphological design, and milling procedures, serving as a reference for clinical applications.

Key words: chairside CAD/CAM, digitalization, intraoral scanning, all-ceramic restoration, group standard

Jian Yang, Hongqiang Ye, Peihui Zou, Xiaoying Chen, Yongsheng Zhou. Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation[J]. Chinese Journal of Stomatological Continuing Education, 2026, 29(2): 96-102.

References

[1] 中华口腔医学会. 椅旁CAD/CAM全瓷修复技术指南: T/CHSA 014—2022[S/OL].2022[2026-01-05]. https://www.ttbz.org.cn/standardDetail/k5cwnlgtlnsux4c5yuqkvl9pf9x286z.html.
[2] 周永胜. 口腔修复学[M]. 第 3 版. 北京:北京大学医学出版社, 2020.
[3] 周永胜, 佟岱. 口腔修复工艺学[M]. 第 2 版 . 北京:北京大学医学出版社, 2020.
[4] 赵铱民. 口腔修复学[M]. 第 8 版. 北京:人民卫生出版社, 2020.
[5] 杨坚. CAD/CAM椅旁系统在微创美学修复中的应用[J]. 中国实用口腔科杂志, 2013, 6(6):337-341.
[6] Abdulkarim LI, Alharamlah FSS, Abubshait RM, et al.Impact of Digital Workflow Integration on Fixed Prosthodontics: A Review of Advances and Clinical Outcomes[J]. Cureus, 2024, 16(10):e72286.
[7] Cioloca Holban C, Tatarciuc M, Vitalariu AM, et al.Three-Dimensional Printing and CAD/CAM Milling in Prosthodontics: A Scoping Review of Key Metrics Towards Future Perspectives[J]. J Clin Med, 2025, 14(14):4837.
[8] Mourouzis P, Dionysopoulos D, Tolidis K.Accuracy of CAD/CAM Technology in Fabricating Custom Post-and-Core Restorations: A Comparative Analysis[J]. J Esthet Restor Dent, 2025, 37(6):1575-1584.
[9] Baradee AA, Spies BC. Are Conventional Impressions Obsolete? A Narrative Review on the Applicability of Intraoral Scanners[J]. Aust Dent J, 2025, 70 Suppl 1(Suppl 1):S93-S104.
[10] Ismail Y, Lawand G, Tohme H.Effect of a novel isolation device on the accuracy of mandibular complete-arch digital impressions: A clinical study[J]. J Dent, 2025, 163:106011.
[11] Moura GF, Mendonça G, Rizzante FAP, et al. Influence of enamel and dentin roughness on intraoral scanner accuracy[J]. J Prosthet Dent, 2026, 135(2):404.e1-404.e9.
[12] Revilla-León M, Kois DE, Kois JC.A guide for maximizing the accuracy of intraoral digital scans. Part 1: Operator factors[J]. J Esthet Restor Dent, 2023, 35(1): 230-240.
[13] Rutkūnas V, Jegelevičius D, Gedrimienė A, et al.Effect of Different Intraoral Scanners on the Accuracy of Bite Registration in Edentulous Maxillary and Mandibular Arches[J]. J Dent, 2024, 146:105050.
[14] Dimitrova M, Vlahova A, Kazakova R.Assessment of CAD/CAM Fabrication Technologies for Post and Core Restorations-A Narrative Review[J]. Medicina (Kaunas), 2024, 60(5):748.
[15] Lee JH.Fabricating a custom zirconia post-and-core without a post-and-core pattern or a scan post[J]. J Prosthet Dent, 2018, 120(2):186-189.
[16] Wahba M, ElBasty RS. In vitro assessment of the accuracy of two intra-oral scanners for post space scanning in a fully digital workflow[J]. BMC Oral Health, 2025, 25(1):407.
[17] Grande F, Pavone L, Molinelli F, et al.CAD-CAM complete digital dentures: An improved clinical and laboratory workflow[J]. J Prosthet Dent, 2025, 133(6): 1430-1435.
[18] Srinivasan M, Handel S, Bronzino I, et al.Comparing analog and 3D measurements of vertical dimension in edentulous subjects[J]. J Dent, 2025, 154:105566.
[19] Kahya Karaca S, Akca K.Comparison of conventional and digital impression approaches for edentulous maxilla: clinical study[J]. BMC Oral Health, 2024, 24(1): 1378.
[20] Singh R, Mistry G, Choudhary M, et al.An update on CAD-CAM usage for removable partial denture fabrication: A systematic review[J]. Bioinformation, 2024, 20(12):1794-1799.
[21] Thu KM, Molinero-Mourelle P, Yeung AWK, et al.Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review[J]. J Prosthet Dent, 2024, 132(5):922-938.
[22] Xie BY, He X, Hu L, et al.Morphological comparison between artificial intelligence-driven and manual CAD design in single tooth restoration: a preliminary study[J]. BMC Oral Health, 2025, 25(1): 1633.
[23] Saad SA, Shalaby YA, Azer AS.Reliability of the digital functionally generated path technique for assessing occlusal interferences and adjusting CAD-CAM zirconia crowns: an in vivo study[J]. BMC Oral Health, 2024, 24(1):1425.
[24] Feng Y, Sun X, Li J, et al.Is dynamic occlusal design necessary for anterior guidance recovery in the computer-aided design process? An in vitro study[J]. J Dent, 2024, 142:104833.
[25] Han T, Xie S, Cheng S, et al.An interdisciplinary treatment to reshape upper anterior displaced teeth by using dynamic occlusal recording with an intraoral scanner[J]. J Esthet Restor Dent, 2024, 36(11):1511-1515.
[26] Jerman E, Lümkemann N, Eichberger M, et al.Evaluation of translucency, Marten’s hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials[J]. Dent Mater, 2021, 37(2):212-222.
[27] 全国卫生产业企业管理协会. 数字化全解剖高透/超透氧化锆修复体临床应用规范: T/NAHIEM 149—2025[S/OL].2025[2025-05-08]. https://www.ttbz.org.cn/standardDetail/g6l4ttqaiw7g2qfycpgcqvd1gzfy9vj.html.
[28] Meng KJ, Wang L, Wang JT, et al.Effect of optical properties of lithium disilicate glass ceramics and light-curing protocols on the curing performance of resin cement[J]. Coatings, 2022, 12(6), 715.

Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 4

Recommended Articles

Metrics

Comments

[1]	Xu Zhou, Yunjiao He, Yawen Cheng, Dandan Xia, Yongsheng Zhou, Yunsong Liu. Interpretation and Application of the Technical Guideline for Chairside CAD/CAM Restoration Using Resin-Ceramic Hybrid Materials [J]. Chinese Journal of Stomatological Continuing Education, 2026, 29(2): 121-130.
[2]	Xiaoyu Gu, Xinquan Jiang. New Progress in Digital Prosthesis for Maxillary Defect [J]. Chinese Journal of Stomatological Continuing Education, 2024, 27(1): 13-18.
[3]	Zhiqiang Xu, Bin Wang, Di Jin, Qianju Wu, Yun Xiao. 5 Years Failure Rate of Intraoral Scanning and Traditional Impression in Fixed Restoration [J]. Chinese Journal of Stomatological Continuing Education, 2024, 27(1): 19-23.
[4]	Chaoyang Wang, Yiru Wang, Jianhao Xu, Songwen Deng, Xiaoling Chen. The Application of Digital Intraoral Scanning Technology in Practical Teaching of Dental Preparation [J]. Chinese Journal of Stomatological Continuing Education, 2024, 27(1): 88-93.