《椅旁CAD/CAM全瓷修复技术指南》解读与应用

doi:10.12337/zgkqjxjyzz.2026.02.003

中国口腔医学继续教育杂志 ›› 2026, Vol. 29 ›› Issue (2): 96-102.DOI: 10.12337/zgkqjxjyzz.2026.02.003

《椅旁CAD/CAM全瓷修复技术指南》解读与应用

杨坚^1,2, 叶红强¹, 邹沛辉², 陈晓颖², 周永胜^1,*

¹北京大学口腔医学院·口腔医院口腔修复科,国家口腔医学中心,口腔疾病国家临床医学研究中心,口腔生物材料和数字诊疗装备国家工程研究中心,颅颌面组织生物智造与修复再生北京市重点实验室,国家卫生健康委口腔数字医学重点实验室,北京,100081;
²北京大学口腔医学院·口腔医院,天竺门诊部,北京,101318

出版日期:2026-03-31 发布日期:2026-06-23
通讯作者: ^* 周永胜,联系方式：010-82195393,电子邮箱：kqzhouysh@hsc.pku.edu.cn,通讯地址：北京市海淀区中关村南大街 22 号,100081

Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation

Jian Yang^1,2, Hongqiang Ye¹, Peihui Zou², Xiaoying Chen², Yongsheng Zhou^1,*

¹Department of Prosthodontics, Peking University School and Hospital of Stomatology & National Center for Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Research Center for Oral Biomaterials and Digital Medical Devices & Beijing Key Laboratory of Craniofacial Tissue Biofabrication and Regeneration & NHC Key Laboratory of Digital Stomatology, Beijing 100081, P.R. China;
²Tianzhu Clinic Division, Peking University School and Hospital of Stomatology, Beijing 101318, P.R. China

Online:2026-03-31 Published:2026-06-23
Contact: Yongsheng Zhou. Tel: 010-82195393. Email: kqzhouysh@hsc.pku.edu.cn. Address: No.22, Zhongguancun South Avenue, Haidian District, Beijing 100081, P.R. China.

摘要/Abstract

摘要： 中华口腔医学会团体标准《椅旁CAD/CAM 全瓷修复技术指南》对使用计算机辅助设计软件进行修复体设计并通过数控切削技术制作修复体的技术体系做出了一系列推荐意见。本文将从适应证选择、材料选择、牙体预备原则、数字化印模的要求、形态设计、切削处理等方面,对该指南展开详细解读,为临床应用提供参考依据。

关键词: 椅旁CAD/CAM, 数字化, 口内扫描, 全瓷修复, 团体标准

Abstract: The group standard of ‘Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation’ issued by the Chinese Stomatological Association proposes a series of recommendations for the technical system of computer aided design/ computer aided manufacturing (CAD/CAM). This article interprets the guidelines in detail from the aspects of indications selection, material selection, tooth preparation principles, requirements for digital impressions, morphological design, and milling procedures, serving as a reference for clinical applications.

Key words: chairside CAD/CAM, digitalization, intraoral scanning, all-ceramic restoration, group standard

杨坚, 叶红强, 邹沛辉, 陈晓颖, 周永胜. 《椅旁CAD/CAM全瓷修复技术指南》解读与应用[J]. 中国口腔医学继续教育杂志, 2026, 29(2): 96-102.

Jian Yang, Hongqiang Ye, Peihui Zou, Xiaoying Chen, Yongsheng Zhou. Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation[J]. Chinese Journal of Stomatological Continuing Education, 2026, 29(2): 96-102.

参考文献

[1] 中华口腔医学会. 椅旁CAD/CAM全瓷修复技术指南: T/CHSA 014—2022[S/OL].2022[2026-01-05]. https://www.ttbz.org.cn/standardDetail/k5cwnlgtlnsux4c5yuqkvl9pf9x286z.html.
[2] 周永胜. 口腔修复学[M]. 第 3 版. 北京:北京大学医学出版社, 2020.
[3] 周永胜, 佟岱. 口腔修复工艺学[M]. 第 2 版 . 北京:北京大学医学出版社, 2020.
[4] 赵铱民. 口腔修复学[M]. 第 8 版. 北京:人民卫生出版社, 2020.
[5] 杨坚. CAD/CAM椅旁系统在微创美学修复中的应用[J]. 中国实用口腔科杂志, 2013, 6(6):337-341.
[6] Abdulkarim LI, Alharamlah FSS, Abubshait RM, et al.Impact of Digital Workflow Integration on Fixed Prosthodontics: A Review of Advances and Clinical Outcomes[J]. Cureus, 2024, 16(10):e72286.
[7] Cioloca Holban C, Tatarciuc M, Vitalariu AM, et al.Three-Dimensional Printing and CAD/CAM Milling in Prosthodontics: A Scoping Review of Key Metrics Towards Future Perspectives[J]. J Clin Med, 2025, 14(14):4837.
[8] Mourouzis P, Dionysopoulos D, Tolidis K.Accuracy of CAD/CAM Technology in Fabricating Custom Post-and-Core Restorations: A Comparative Analysis[J]. J Esthet Restor Dent, 2025, 37(6):1575-1584.
[9] Baradee AA, Spies BC. Are Conventional Impressions Obsolete? A Narrative Review on the Applicability of Intraoral Scanners[J]. Aust Dent J, 2025, 70 Suppl 1(Suppl 1):S93-S104.
[10] Ismail Y, Lawand G, Tohme H.Effect of a novel isolation device on the accuracy of mandibular complete-arch digital impressions: A clinical study[J]. J Dent, 2025, 163:106011.
[11] Moura GF, Mendonça G, Rizzante FAP, et al. Influence of enamel and dentin roughness on intraoral scanner accuracy[J]. J Prosthet Dent, 2026, 135(2):404.e1-404.e9.
[12] Revilla-León M, Kois DE, Kois JC.A guide for maximizing the accuracy of intraoral digital scans. Part 1: Operator factors[J]. J Esthet Restor Dent, 2023, 35(1): 230-240.
[13] Rutkūnas V, Jegelevičius D, Gedrimienė A, et al.Effect of Different Intraoral Scanners on the Accuracy of Bite Registration in Edentulous Maxillary and Mandibular Arches[J]. J Dent, 2024, 146:105050.
[14] Dimitrova M, Vlahova A, Kazakova R.Assessment of CAD/CAM Fabrication Technologies for Post and Core Restorations-A Narrative Review[J]. Medicina (Kaunas), 2024, 60(5):748.
[15] Lee JH.Fabricating a custom zirconia post-and-core without a post-and-core pattern or a scan post[J]. J Prosthet Dent, 2018, 120(2):186-189.
[16] Wahba M, ElBasty RS. In vitro assessment of the accuracy of two intra-oral scanners for post space scanning in a fully digital workflow[J]. BMC Oral Health, 2025, 25(1):407.
[17] Grande F, Pavone L, Molinelli F, et al.CAD-CAM complete digital dentures: An improved clinical and laboratory workflow[J]. J Prosthet Dent, 2025, 133(6): 1430-1435.
[18] Srinivasan M, Handel S, Bronzino I, et al.Comparing analog and 3D measurements of vertical dimension in edentulous subjects[J]. J Dent, 2025, 154:105566.
[19] Kahya Karaca S, Akca K.Comparison of conventional and digital impression approaches for edentulous maxilla: clinical study[J]. BMC Oral Health, 2024, 24(1): 1378.
[20] Singh R, Mistry G, Choudhary M, et al.An update on CAD-CAM usage for removable partial denture fabrication: A systematic review[J]. Bioinformation, 2024, 20(12):1794-1799.
[21] Thu KM, Molinero-Mourelle P, Yeung AWK, et al.Which clinical and laboratory procedures should be used to fabricate digital complete dentures? A systematic review[J]. J Prosthet Dent, 2024, 132(5):922-938.
[22] Xie BY, He X, Hu L, et al.Morphological comparison between artificial intelligence-driven and manual CAD design in single tooth restoration: a preliminary study[J]. BMC Oral Health, 2025, 25(1): 1633.
[23] Saad SA, Shalaby YA, Azer AS.Reliability of the digital functionally generated path technique for assessing occlusal interferences and adjusting CAD-CAM zirconia crowns: an in vivo study[J]. BMC Oral Health, 2024, 24(1):1425.
[24] Feng Y, Sun X, Li J, et al.Is dynamic occlusal design necessary for anterior guidance recovery in the computer-aided design process? An in vitro study[J]. J Dent, 2024, 142:104833.
[25] Han T, Xie S, Cheng S, et al.An interdisciplinary treatment to reshape upper anterior displaced teeth by using dynamic occlusal recording with an intraoral scanner[J]. J Esthet Restor Dent, 2024, 36(11):1511-1515.
[26] Jerman E, Lümkemann N, Eichberger M, et al.Evaluation of translucency, Marten’s hardness, biaxial flexural strength and fracture toughness of 3Y-TZP, 4Y-TZP and 5Y-TZP materials[J]. Dent Mater, 2021, 37(2):212-222.
[27] 全国卫生产业企业管理协会. 数字化全解剖高透/超透氧化锆修复体临床应用规范: T/NAHIEM 149—2025[S/OL].2025[2025-05-08]. https://www.ttbz.org.cn/standardDetail/g6l4ttqaiw7g2qfycpgcqvd1gzfy9vj.html.
[28] Meng KJ, Wang L, Wang JT, et al.Effect of optical properties of lithium disilicate glass ceramics and light-curing protocols on the curing performance of resin cement[J]. Coatings, 2022, 12(6), 715.

《椅旁CAD/CAM全瓷修复技术指南》解读与应用

Interpretation and Application of the Guidelines for Chairside CAD/CAM All-Ceramic Rehabilitation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	吴玉琼, 曾德良, 黄慧, 蒋欣泉. 《牙体及牙列缺损固定修复的口内数字化印模制取专家共识》解读与应用[J]. 中国口腔医学继续教育杂志, 2026, 29(2): 88-95.
[2]	张竞心, 张雅杰, 苏颖悦, 高姗姗. 基于拼接式托盘精准印模制取的美观卡环可摘局部义齿修复牙列缺损1例[J]. 中国口腔医学继续教育杂志, 2026, 29(2): 150-163.
[3]	吕春旭, 邵金龙, 陈叶翎, 王思梦, 葛少华. 一步一步做好美学牙冠延长术[J]. 中国口腔医学继续教育杂志, 2025, 28(4): 199-206.
[4]	张佳忆, 杨丹, 张家愚, 王云霁, 宋锦璘, 刘洋. 无托槽隐形矫治结合Andrews六要素的青少年骨性Ⅱ类拔牙病例1例[J]. 中国口腔医学继续教育杂志, 2025, 28(2): 108-122.
[5]	唐天弘, 翁维民. 数字化技术助力重度磨耗患者咬合重建1例[J]. 中国口腔医学继续教育杂志, 2024, 27(3): 233-245.
[6]	梁杰, 陈琳, 于甜甜, 张佳, 许胜, 张静, 柳忠豪. 分步教学法在数字化种植导板设计培训中的应用[J]. 中国口腔医学继续教育杂志, 2024, 27(2): 150-154.
[7]	于海洋, 罗天, 孙纪奎, 赵雨薇, 李丹雪, 杨扬, 高姗姗. 立体几何与测量学在口腔修复中的应用[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 1-6.
[8]	邓碧霞, 李思雨. 数字化技术在重度磨耗咬合重建病例中的应用进展[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 7-12.
[9]	顾晓宇, 蒋欣泉. 数字化上颌骨缺损赝复体修复新进展[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 13-18.
[10]	许志强, 王彬, 金地, 吴千驹, 肖云. 在固定修复中使用口内扫描和传统印模的5年返工率比较分析[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 19-23.
[11]	李嘉鑫, 刘欣然, 岳源, 王敏, 郝亮. 数字化下颌运动分析系统辅助前牙区多单位功能性精准修复1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 24-32.
[12]	李洁婷, 朱文昊, 王琳. 应用数字化技术进行过渡性前牙修复1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 33-43.
[13]	张竞心, 邓久鸿, 熊鑫, 高姗姗. 正畸-修复联合咬合重建治疗牙列过度磨损1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 44-62.
[14]	杨帆, 刘敏, 衡墨笛, 王乔, 王时敏, 刘雪楠, 朱原, 王飞龙, 何云娇, 李曼, 刘云松. 数字化技术助力唇腭裂患者全牙列咬合重建1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 63-72.
[15]	王朝阳, 王一如, 徐剑浩, 邓淞文, 陈晓玲. 数字化口内扫描技术在牙体预备实践教学中的应用[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 88-93.