数字化技术在重度磨耗咬合重建病例中的应用进展

doi:10.12337/zgkqjxjyzz.2024.01.002

中国口腔医学继续教育杂志 ›› 2024, Vol. 27 ›› Issue (1): 7-12.DOI: 10.12337/zgkqjxjyzz.2024.01.002

数字化技术在重度磨耗咬合重建病例中的应用进展

邓碧霞^1,2, 李思雨^1,*

¹北京大学口腔医学院·口腔医院综合治疗科,国家口腔疾病临床医学研究中心,口腔数字化医疗技术和材料国家工程实验室,口腔数字医学北京市重点实验室;
²华中科技大学协和深圳医院口腔科

出版日期:2024-01-31 发布日期:2024-05-08
通讯作者: ^*李思雨,联系方式：010-82195586,电子邮箱：lisiyu981@163.com,通讯地址：北京市海淀区中关村南大街22号,100081
基金资助:
广东省临床教学基地教学改革研究项目（项目编号:2021JD088）

Advancements in Digital Technology for the Rehabilitation of Severely Worn Dentition

Bixia Deng^1,2, Siyu Li^1,*

¹Department of General Dentistry, Peking University School and Hospital of Stomatology, National Clinical Research Center for Oral Diseases, National Engineering Laboratory for Digital and Material Technology of Stomatology, Beijing Key Laboratory of Digital Stomatology, Beijing, P.R. China;
²Department of Stomatology, Huazhong University of Science and Technology Union Shenzhen Hospital, Shenzhen, Guangdong Province, P.R. China

Online:2024-01-31 Published:2024-05-08
Contact: Siyu Li. Tel: 010-82195586. Email: lisiyu981@163.com. Address: No.22 Zhongguancun South Avenue, Haidian District, Beijing 100081, P.R. China.
Supported by:
Education Fund of Guangdong Province of China (No.2021JD088)

摘要/Abstract

摘要： 全口磨耗是一种常见的牙齿疾病,其主要特征是牙齿表面的磨损。对于严重的全口磨耗患者,咬合重建是一种有效的治疗方法。随着数字化技术的迅速发展,通过数字化进行咬合重建已成为生物医学工程领域的研究热点,其可在口腔扫描和分析、牙冠修复设计和制造、咬合分析和治疗计划等方面发挥重要作用,不仅可提高疾病的诊断准确性、降低误诊率,还可为患者提供更个性化的治疗方案。然而,数字化方法在实际应用中仍然面临技术、伦理和法律等方面的问题。因此,本综述将为研究人员提供一个全面了解数字化方法在重度磨耗咬合重建病例中应用进展的参考框架。

关键词: 牙齿磨耗, 计算机辅助设计, 咬合重建, 人工智能, 数字化技术

Abstract: Severe worn dentition is a common dental disease characterized by the erosion of tooth surfaces. For patients with severe tooth wear, occlusal reconstruction is an effective treatment method. With the rapid development of digital technology, digital occlusal reconstruction has become a research focus in biomedical engineering. It plays a crucial role in oral scanning and analysis, crown restoration design and manufacturing, occlusal analysis, and treatment planning. Digital methods not only improve the accuracy of disease diagnosis and reduce misdiagnosis rates but also provide more personalized treatment options for patients. However, the practical application of digital methods still faces technical, ethical, and legal challenges. Therefore, this review aims to provide researchers with a comprehensive understanding and reference framework for applying digital methods in cases of severe tooth wear rehabilitation.

Key words: tooth wear, computer-aided design, occlusal reconstruction, artificial intelligence, digital technology

邓碧霞, 李思雨. 数字化技术在重度磨耗咬合重建病例中的应用进展[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 7-12.

Bixia Deng, Siyu Li. Advancements in Digital Technology for the Rehabilitation of Severely Worn Dentition[J]. Chinese Journal of Stomatological Continuing Education, 2024, 27(1): 7-12.

参考文献

[1] 周永胜. 口腔修复学[M]. 第3版. 北京:北京大学出版社, 2020.
[2] 骆小平. 牙齿磨损的病因、分类及修复重建治疗进展[J]. 中华口腔医学杂志, 2016, 51(10):577-582.
[3] 谭建国. 一步一步做好牙列重度磨耗的功能美学重建[J]. 中华口腔医学杂志, 2020, 55(9):696-700.
[4] Van’t Spijker A, Rodriguez JM, Kreulen CM, et al.Prevalence of tooth wear in adults[J]. Int J Prosthodont. 2009; 22(1):35-42.
[5] 谭建国. 数字化技术在牙列重度磨耗功能美学重建中的应用[J]. 中华口腔医学杂志, 2022, 57(10):1009-1114.
[6] Smith BG, Knight JK.An index for measuring the wear of teeth[J]. Br Dent J. 1984; 156(12):435-438.
[7] Bartlett D, Ganss C, Lussi A. Basic Erosive Wear Examination (BEWE): a new scoring system for scientific and clinical needs[J]. Clin Oral Investig.2008; 12 Suppl 1(Suppl 1):S65-S68.
[8] Wetselaar P, Lobbezoo F.The tooth wear evaluation system: a modular clinical guideline for the diagnosis and management planning of worn dentitions[J]. J Oral Rehabil. 2016; 43(1):69-80.
[9] Wulfman C, Koenig V, Mainjot AK.Wear measurement of dental tissues and materials in clinical studies: A systematic review[J]. Dent Mater. 2018; 34(6):825-850.
[10] 蓝凯文, 戴驰, 聂嘉祺, 等. 牙磨耗评价的临床应用和研究进展[J]. 中华口腔医学研究杂志(电子版), 2021, 14(5):267-271.
[11] 黄婉怡, 战德松. 口内扫描数字化印模系统分类及其应用[J]. 中国实用口腔科杂志, 2017, 10(8):452-457.
[12] Kumar S, Keeling A, Osnes C, et al.The sensitivity of digital intraoral scanners at measuring early erosive wear[J]. J Dent. 2019; 81:39-42.
[13] DeLong R. Intra-oral restorative materials wear: rethinking the current approaches: how to measure wear[J]. Dent Mater. 2006; 22(8):702-711.
[14] Lee SP, Nam SE, Lee YM, et al.The development of quantitative methods using virtual models for the measurement of tooth wear[J]. Clin Anat. 2012; 25(3):347-358.
[15] Kullmer O, Benazzi S, Fiorenza L, et al.Technical note: Occlusal fingerprint analysis: quantification of tooth wear pattern[J]. Am J Phys Anthropol. 2009; 139(4):600-605.
[16] Fiorenza L, Menter CG, Fung S, et al.The functional role of the Carabelli trait in early and late hominins[J]. J Hum Evol. 2020; 145:102816.
[17] Fiorenza L, Benazzi S, Kullmer O, et al.Dental macrowear and cortical bone distribution of the Neanderthal mandible from Regourdou (Dordogne, Southwestern France)[J]. J Hum Evol. 2019; 132:174-188.
[18] 慕创创, 李刚. 基于神经网络的深度学习在医学影像中的研究进展[J]. 中华口腔医学杂志, 2019, 54(7):492-497.
[19] Carrillo-Perez F, Pecho OE, Morales JC, et al.Applications of artificial intelligence in dentistry: A comprehensive review[J]. J Esthet Restor Dent. 2022; 34(1):259-280.
[20] Shan T, Tay FR, Gu L.Application of artificial intellig-ence in dentistry[J]. J Dent Res. 2021; 100(3):232-244.
[21] 李骋, 陈虎, 王勇, 等. 人工神经网络对口腔三维解剖特征分割与识别的研究进展[J]. 中华口腔医学杂志, 2022, 57(5):540-546.
[22] Khanagar SB, Al-Ehaideb A, Maganur PC, et al.Developments, application, and performance of artificial intelligence in dentistry-A systematic review[J]. J Dent Sci. 2021; 16(1):508-522.
[23] Ye H, Wang KP, Liu Y, et al.Four-dimensional digital prediction of the esthetic outcome and digital implementation for rehabilitation in the esthetic zone[J]. J Prosthet Dent. 2020; 123(4):557-563.
[24] 叶红强, 柳玉树, 王冠博, 等. 三维数字化仿真设计与实现技术在前牙美学修复中的应用[J]. 中华口腔医学杂志, 2020, 55(10):729-736.
[25] 邱淑婷, 朱玉佳, 王时敏, 等. 姿势微笑位口唇对称参考平面的数字化构建及初步应用验证[J]. 北京大学学报, 2022, 54(1):193-199.
[26] Lepidi L, Galli M, Mastrangelo F, et al.Virtual Articulators and Virtual Mounting Procedures: Where Do We Stand?[J]. J Prosthodont. 2021; 30(1):24-35.
[27] Úry E, Fornai C, Weber GW.Accuracy of transferring analog dental casts to a virtual articulator[J]. J Prosthet Dent. 2020; 123(2):305-313.
[28] Woodford SC, Robinson DL, Mehl A, et al.Measurement of normal and pathological mandibular and temporomandibular joint kinematics: A systematic review[J]. J Biomech. 2020; 111:109994.
[29] Lanis A, Gallucci G, Pedrinaci I.Full mouth oral rehabilitation of a severely worn dentition based on a fully digital workflow[J]. J Esthet Restor Dent. 2023; 35(4):596-608.
[30] Yar R.Digital workflows for the management of tooth wear[J]. Br Dent J. 2023; 234(6):427-431.
[31] Revilla-León M, Kois DE, Zeitler JM, et al.An overview of the digital occlusion technologies: Intraoral scanners, jaw tracking systems, and computerized occlusal analysis devices[J]. J Esthet Restor Dent. 2023; 35(5):735-744.
[32] Loomans B, Opdam N, Attin T, et al.Severe Tooth Wear: European Consensus Statement on Management Guidelines[J]. J Adhes Dent. 2017; 19(2):111-119.
[33] 谭建国. 一步一步做好牙列重度磨耗咬合重建中咬合关系的复制和转移[J]. 中华口腔医学杂志, 2021, 56(8):825-828.
[34] 李峥, 柳玉树, 王时敏, 等. 数字化方法复制暂时修复体𬌗面形态在重度磨耗病例中的应用[J]. 北京大学学报, 2021, 53(1):62-68.
[35] Takeuchi Y, Koizumi H, Furuchi M, et al.Use of digital impression systems with intraoral scanners for fabricating restorations and fixed dental prostheses[J]. J Oral Sci. 2018; 60(1):1-7.
[36] Gao H, Liu X, Liu M, et al.Accuracy of three digital scanning methods for complete-arch tooth preparation: An in vitro comparison[J]. J Prosthet Dent. 2022; 128(5):1001-1008.
[37] Renne WG, Evans ZP, Mennito A, et al.A novel technique for reference point generation to aid in intraoral scan alignment[J]. J Esthet Restor Dent. 2017; 29(6):391-395.
[38] Revilla-León M, Zeitler JM, Kois JC. Digital maxillomandibular relationship and mandibular motion recording by using an optical jaw tracking system to acquire a dynamic virtual patient[J]. J Prosthet Dent.2022:S0022-3913(22)00338-9.
[39] 孙欣荣, 冯玥, 刘伟才. 多模态数据融合的可视化技术在咬合重建中的应用[J]. 华西口腔医学杂志, 2022, 40(4):468-475.
[40] Méndez-Manjón I, Haas OL Jr, Guijarro-Martínez R, et al.Semi-Automated Three-Dimensional Condylar Reconstruction[J]. J Craniofac Surg. 2019; 30(8):2555-2559.
[41] 田素坤, 戴宁, 袁福来, 等. 基于条件生成对抗网络的缺失牙体功能性咬合面形态设计方法[J]. 中国机械工程, 2021, 32(3):331-340.

数字化技术在重度磨耗咬合重建病例中的应用进展

Advancements in Digital Technology for the Rehabilitation of Severely Worn Dentition

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李洁婷, 朱文昊, 王琳. 应用数字化技术进行过渡性前牙修复1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 33-43.
[2]	张竞心, 邓久鸿, 熊鑫, 高姗姗. 正畸-修复联合咬合重建治疗牙列过度磨损1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 44-62.
[3]	杨帆, 刘敏, 衡墨笛, 王乔, 王时敏, 刘雪楠, 朱原, 王飞龙, 何云娇, 李曼, 刘云松. 数字化技术助力唇腭裂患者全牙列咬合重建1例[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 63-72.
[4]	杨博, 杨涛, 邓晓怡, 陈丹莹, 廖玲香, 申林汉, 李聆, 李晓岚, 洪筠, 滕伟, 王焱, 杨凌. 口腔固定修复数字化技术课程教学实践[J]. 中国口腔医学继续教育杂志, 2024, 27(1): 99-105.
[5]	张岩丽, 郑周鹏. 术后恶心呕吐的研究进展[J]. 中国口腔医学继续教育杂志, 2023, 26(6): 438-441.
[6]	高璐, 许桐楷, 丁茜, 张一, 廖宇, 安娜. 上下颌牙列缺损老年患者的多学科综合治疗1例[J]. 中国口腔医学继续教育杂志, 2023, 26(4): 284-293.
[7]	毋育伟, 曹佳, 钱军, 杨力, 赵一姣, 王勇, 唐志辉. 改良口内扫描直接印模技术在牙列缺失患者种植固定修复中的应用1例[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 87-94.
[8]	任薇, 金春晓, 杨胜涛, 高姗姗, 岳莉. 一种混合瓷贴面技术用于咬合重建修复1例[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 95-102.
[9]	王兵, 衡墨笛, 国丹妮, 潘韶霞, 国丽丽, 郭天皓, 屈健, 冯海兰. 探讨数字化修复工艺技术在全口义齿复制中的应用1例[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 107-115.
[10]	刘鹏, 程石, 李靖桓, 邓宏燕. 咬合重建病例的蜡型设计与口内实现1例[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 123-128.
[11]	浦婷婷, 王时敏, 李晓利, 贾璐, 孙雨, 佟岱. 数字化切削树脂冠在正畸牙临时冠修复中的应用[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 129-136.
[12]	刘畅, 李娜, 李靖桓. 口腔修复工艺专业课程线上教学的模式思考[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 145-148.
[13]	王晶, 徐曼, 王俊莹, 杨德武. 基于优慕课平台的混合式教学模式在口腔数字化技术课程中的实践研究[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 149-153.
[14]	王鹤云, 张倩倩, 杨兴强, 董博, 任薇, 岳莉. 数字化在口腔医学技术实践教学的探索与应用[J]. 中国口腔医学继续教育杂志, 2023, 26(2): 154-159.
[15]	冯志宏, 赵铱民. 颌面赝复治疗的进展[J]. 中国口腔医学继续教育杂志, 2022, 25(6): 329-334.