Digital Technology for the Restoration of Bilateral Maxillary Cusp Teeth in Oral Comprehensive Treatment

doi:10.12337/zgkqjxjyzz.2023.04.006

Chinese Journal of Stomatological Continuing Education ›› 2023, Vol. 26 ›› Issue (4): 273-283.DOI: 10.12337/zgkqjxjyzz.2023.04.006

Previous Articles Next Articles

Digital Technology for the Restoration of Bilateral Maxillary Cusp Teeth in Oral Comprehensive Treatment

Pin Lv^*, Yu Wu, Haojie Wang

Department of Stomatology, Peking University Third Hospital, Beijing, P.R. China

Online:2023-07-31 Published:2023-11-29
Contact: Pin Lv. Tel: 010-82266126. Email: jaylill2@163.com. Address: No. 49 Huayuan North Road, Haidian District, Beijing 100191, P.R. China
Supported by:
Bejing Municipal Health Commission 2021 Residency Training Quality Improvement Program Residency Training 2021071

Abstract

Abstract: Objective: To report a case of digital technology for the restoration of bilateral maxillary cusp teeth loss in oral comprehensive treatment. Diagnosis and treatment: On the basis of systematic oral examination and definite diagnosis, the patient received sequential oral treatments, including systemic periodontal treatment, extraction of impacted third molar, and restoration of maxillary bilateral missing cuspid teeth. Among them,was implanted and repaired under the guidance of digital guide plate, andwas repaired with cantilevered all-ceramic bonding bridge. Results: The position of the implants guided by the digital implant guide was consistent with the preoperative design. The appearance and function of the implant restoration and cantilevered bonding bridge were satisfactry. After the treatment, the periodontal health was maintained and the function of restorations were planting. Conclusions: The 3D position of the implant can be accurately controlled by digital implant guide, and the digital impression obtained by intraoral scanning technology can achieve guide therapeutic effect.

Key words: digital technology, digital guide plate, bonding bridge, general dental treatment, Intraoral scan

Pin Lv, Yu Wu, Haojie Wang. Digital Technology for the Restoration of Bilateral Maxillary Cusp Teeth in Oral Comprehensive Treatment[J]. Chinese Journal of Stomatological Continuing Education, 2023, 26(4): 273-283.

References

[1] Monje A, Galindo-Moreno P, Tözüm TF, et al.Into the paradigm of local factors as contributors for peri-implant disease: short communication[J]. Int J Oral Maxillofac Implants. 2016; 31(2):288-292.
[2] Abduo J, Lau D.Accuracy of static computer-assisted implant placement in anterior and posterior sites by clinicians new to implant dentistry: in vitro comparison of fully guided, pilot-guided, and freehand protocols[J]. Int J Implant Dent. 2020; 6(1):10.
[3] Apostolakis D, Kourakis G.CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination[J]. Int J Implant Dent. 2018; 4(1):34.
[4] Gedrimiene A, Adaskevicius R, Rutkunas V.Accuracy of digital and conventional dental implant impressions for fixed partial dentures: a comparative clinical study[J]. J Adv Prosthodont. 2019; 11(5):271-279.
[5] 黄平,商红国,刘海英. 数字化种植导板的研究进展[J]. 全科口腔医学杂志(电子版), 2019, 6(24):30-31, 38.
[6] D'haese J, Ackhurst J, Wismeijer D, et a1. Current state of the art of computer-guided implant surgery[J]. Periodontol 2000. 2017; 73(1):121-133.
[7] Cassetta M, Di Mambro A, Giansanti M, et al.The intrinsic error of a stereolithograPhic surgical template in imPlant guided surgery[J]. Int J Oral Maxillofac Surg. 2013; 42(2):264-275.
[8] 耿威. 数字化口腔种植治疗现状与研究进展[J]. 中国实用口腔科杂志, 2016, 9(1):2-9.
[9] Ye NS, Long H, Xue J, et al.Integration accuracy of laser-scanned dental models into maxillofacial cone beam computed tomography images of different voxel sizes with different segmentation threshold settings[J]. Oral Surg Oral Med Oral Pathol Oral Radiol. 2014; 117(6):780-786.
[10] Michelinakis G, Apostolakis D, Tsagarakis A, et al.A comparison of accuracy of 3 intraoral scanners: a singleblinded in vitro study[J]. J Prosthet Dent. 2020; 124(5):581-588.
[11] Jamjoom FZ, Kim DG, McGlumphy EA, et al. Positional accuracy of a prosthetic treatment plan incorporated into a cone beam computed tomography scan using surface scan registration[J]. J Prosthet Dent. 2018; 120(3):367-374.
[12] Lin CH, Lin YM, Lai YL, et al.Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA[J]. J Prosthet Dent. 2020; 123(2):349-354.
[13] Van Assche N, Quirynen M.Tolerance within a surgical guide[J]. Clin Oral Implants Res. 2010; 21(4):455-458.
[14] Koop R, Vercruyssen M, Vermeulen K, et al.Tolerance within the sleeve inserts of different surgical guides for guided implant surgery[J]. Clin Oral Implants Res. 2013; 24(6):630-634.
[15] 于海洋. 种植修复里的数字追问——从经验类比到数字引导[J]. 华西口腔医学杂志, 2021, 39(4):386-397.
[16] 包旭东, 岳林. 口内扫描仪临床扫描精度及影响因素把控[J]. 口腔医学, 2022, 42(9):769-773.
[17] Müller P,Ender A,Joda T,et al.Impact of digital intraoral scan strategies on the impression accuracy using the TRIOS Pod scanner[J]. Quintessence Int. 2016; 47(4):343-349.
[18] Motel C, Kirchner E, Adler W, et al.Impact of Different Scan Bodies and Scan Strategies on the Accuracy of Digital Implant Impressions Assessed with an Intraoral Scanner: An In Vitro Study[J]. J Prosthodont. 2020; 29(4):309-314.
[19] Chrcanovic BR, Kisch J, Albrektsson T.Factors influencing the fracture of dental implants[J]. Clin Implant Dent Relat Res. 2018; 20(1):58-67.
[20] Brizuela -Velasco A, Pérez-Pevida E, Jiménez-Garrudo A, et al.Mechanical characterisation and biomechanical and biological behaviours of Ti-Zr binaryalloy dental implants[J]. Biomed Res Int. 2017; 2017:2785863.
[21] Saulacic N, Bosshardt DD, Bornstein MM, et al.Bone apposition to a titanium-zirconium alloy implant, as compared to two other titanium-containing implants[J]. Eur Cell Mater. 2012; 23(10):273-286.
[22] Worni A, Hicklin SP, Mericske-Stern RA.Performance and marginal bone level alteration around immediately loaded narrow-diameter implants. A prospective clinical study: results after 1 year[J]. Quintessence Int. 2018; 49(4):267-276.
[23] Schiegnitz E, Al-Nawas B. Narrow-diameter implants: a systematic review and meta-analysis[J]. Clin Oral Implants Res.2018; 29 Suppl 16:21-40.
[24] 刘东升, 王彦梅, 何家才. 钛锆小直径种植体应用于前牙美学区的临床效果[J]. 口腔疾病防治, 2019, 27(7):446-450.
[25] 冯海兰, 徐军. 口腔修复学[M]. 第2版. 北京:北京大学医学出版社, 2013.
[26] 姜荷, 程鑫然, 吴峻岭, 等. 个别牙缺失全瓷树脂粘接固定局部义齿修复现状[J]. 口腔颌面修复学杂志, 2022, 23(2):142-146.
[27] Wei YR, Wang XD, Zhang Q, et al.Clinical performance of anterior resin-bonded fixed dental prostheses with different framework designs: a systematic review and meta-analysis[J]. J Dent. 2016; 47:1-7.
[28] Naenni N, Michelotti G, Lee WZ, et al.Resin-bond-ed fixed dental prostheses with zirconia ceramic single retainers show high survival rates and minimal tissue changes after a mean of 10 years of service[J]. Int J Prosthodont. 2020; 33(5):503-512.
[29] Botelho MG, Ma X, Cheung GJ, et al.Long-term clinical evaluation of 211 two-unit cantilevered resin-bonded fixed partial dentures[J]. J Dent. 2014;42(7):778-784.
[30] 杨丽丽, 杜德标, 宁若愚, 等. 单端全瓷树脂粘接桥在修复个别前牙缺失中的应用[J].华西口腔医学杂志, 2017, 35(4):399-402.
[31] Lam WYH, Chan RST, Li KY, et al.Ten-year clinical evaluation of posterior resin-bonded fixed partial dentures[J]. J Dent. 2019; 86:118-125.

Digital Technology for the Restoration of Bilateral Maxillary Cusp Teeth in Oral Comprehensive Treatment

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 2

Recommended Articles

Metrics

Comments

[1]	Chang Liu, Na Li, Jing-Huan Li. Thinking on the online teaching model of oral prosthetic technology [J]. Chinese Journal of Stomatological Continuing Education, 2023, 26(2): 145-148.
[2]	Heyun Wang, Qianqian Zhang, Xingqiang Yang, Bo Dong, Wei Ren, Li Yue. Digital application in dental technology practical teaching [J]. Chinese Journal of Stomatological Continuing Education, 2023, 26(2): 154-159.